How the total is worked out
For each service you tick, the length is multiplied by your rate per foot. With a low and a high rate, that gives a low and a high amount. Each add-on you tick is added at its own price. If you set a minimum charge and the total comes out below it, the total is raised to the minimum. Amounts are worked to the cent, and the working under the total shows every line, so you can check it.
What can change your rate per foot
Length is where a by-the-foot price starts, not the whole story. Things to weigh when you set your rates, or when you decide where in your range a job falls:
- Condition. How long it's been since the last detail, and what's on it: water spots, mildew, bird droppings, a scum line along the hull.
- Oxidation. Chalky, faded gelcoat or fiberglass can take compounding and more than one polishing pass. Light and heavy oxidation are different jobs, so you may want a rate for each.
- Access. Whether you can reach everything from the ground or need a ladder, scaffolding or a lift, how much room there is around it, and whether there's water and power where it's parked.
- On a trailer or in the water. On a trailer, you can walk all the way around the boat and reach the hull. In the water, you work from the dock or from another boat, and the hull below the waterline is out of reach from there. A marina may have its own rules about outside detailers, so ask before you book.
- The roof on an RV. Getting onto it or reaching it, what it's made of, and what's on it (air conditioners, vents, solar panels) change how long it takes and what you clean it with. Ask what the roof is made of before you quote.
- Height and shape. A boat with a cabin or a flybridge has more surface than a low boat of the same length, and an RV with slide-outs has more than one without. Set a higher rate for those, or price the extra as an add-on.
Where your rate per foot comes from
From your own hours and costs, not from this page. One way: price a job you know well line by line with how to price a detailing job (labor, supplies, travel, overhead and markup), then divide that price by the job's length. Check the rate against your next few jobs, and change it when they take more or less time than you planned.
When the job is done, the free boat detailing invoice template and RV detailing invoice template lay out the bill. Detailing cars too? The car detailing price calculator shows one way vehicle size and condition can scale a base price.
Frequently asked questions
How do you price boat or RV detailing by the foot?
Measure the length in feet and multiply it by your rate per foot for each service, then add any add-ons you charge a flat price for. With a low and a high rate, you get a low and a high total. This calculator does that arithmetic with the rates you type, shows every line of the working, and never goes below your minimum charge if you set one.
What should I charge per foot?
This page can't tell you, and every rate box starts empty on purpose: nobody surveyed boat or RV detailing prices for it. Work your rate out from your own hours and costs. One way is to price a job you know well line by line (labor, supplies, travel, overhead and markup), then divide that price by the job's length. Then weigh the things on this page, like condition, oxidation and access.
How should I measure a boat or an RV?
Pick one way and use it every time, so the same boat or RV gets the same price, and say on your price list what you measure. For a boat, decide whether the length includes the swim platform, the bow pulpit and the motor; for an RV, whether it includes the hitch, the ladder and the bumper. Type part of a foot as a decimal: 28 ft 6 in is 28.5.
Is what I type sent anywhere or saved?
It isn't sent to us or to anyone else: the arithmetic happens in your browser. Copy as a text puts the message on your device's clipboard, and it goes only where you paste it. While the tab is open, your browser keeps what you typed in that tab, so a reload doesn't lose it. Close the tab and it's gone.
Can Fourth Bucket make boat or RV estimates from photos?
No. Fourth Bucket's photo estimates are built for cars, trucks, vans and SUVs. This calculator is a separate free tool, and it works the same whether or not you use the app. If you detail boats or RVs and would want photo estimates for them, email support@fourthbucket.com with the subject "Boat and RV photo estimates".
Why send a customer a range instead of one price?
Because a boat or RV can hide work until you're standing beside it: oxidation that needs more than one polishing pass, mildew under a cover, a roof nobody has looked at in a while. Set your low and high rates as far apart as you need for that, and confirm the final price on-site. The message this calculator makes ends with that line.
Photo estimates are for cars, trucks, vans and SUVs
Fourth Bucket's photo estimates are built for cars, trucks, vans and SUVs. If you detail boats or RVs and would want photo estimates for them, tell us at support@fourthbucket.com. This calculator is free either way.
Keep reading: Boat detailing invoice template · RV detailing invoice template · How to price a detailing job · Car detailing price calculator
Detail cars and trucks too?
Fourth Bucket drafts an estimate from photos of a car, truck, van or SUV. The AI recommends services from your own menu, the price range comes from your own prices, and you approve every number. Your first 10 AI photo estimates are free, no card required.
Start free